In developing the Second Generation XF2 Series Pneumatic Tire Forklift, comfort and ease of operation were carefully considered. For example, the overhead guard, gearbox, and seat are fully-suspended and offer a three stage vibration reduction. The fully-enclosed cab, heater, and air conditioner provide maximum comfort no matter the outside working conditions. These features, coupled with a low center of gravity and improved visibility in all directions, provide the end user with a safe and comfortable experience.
Easy-to-See Display
The easy-to-see LCD instrument display lets the operator check on all aspects of operational status with a glance. The instrument display consists of a 4″ color LCD screen, four interactive buttons, and one CAN bus communication function. The communication protocol is compatible with CANopen and SAE J1939 standards.
Ergonomic Operator Compartment
1. The XF2 Series can be optioned with a fully-enclosed cab, heater, and air conditioner to ensure operator comfort no matter the outside condition.
2. The XF2 Series Forklift is equipped with sound-absorbing cotton padding to decrease noise.
3. The new counterweight design, three-stage lift mast, and enlarged operator compartment create optimal visibility in all directions offering the best conditions for relaxed and safe operation.
4. The central parking brake requires less force to engage and increases the ease of operation.
Kubota WG2503 LP/Duel Fuel Engines
The XF2 features the well-known and reliable Kubota WG2503 LPG or Dual Fuel engine. The WG2503 engine features performance, a reliable supply chain to ensure low lead times, and a diagnostics system that allows for easier and more accurate maintenance. The engine is also Tier 2 EPA compliant. These features ensure that the Kubota WG2503 motors are powerful and reliable enough to get the job done.
Kubota V2607-CR-E5B Diesel Engine
Hangcha uses the powerful Kubota diesel engine in our pneumatic tire forklifts. The Kubota engine is Tier 4F compliant. The engine uses common rail fuel systems, diesel oxidation catalysts (DOC), and diesel particulate filters (DPF) to meet the Tier 4F compliance. This engine helps the Hangcha forklifts maximize their efficiency and reliability for the end-user.
By focusing on enhancing reliability and reducing downtime, the XF2 series is able to increase productivity for its end-users.
Well Known Components
The XF2 Series features well known drivetrain components such as GCT K25 Engines, Kubota V2607 Diesel Engines, Okamura transmissions, and a wet Brake Drive Axle for prolong service life and reliability.
Electronics
The new controller is integrated into all of the electrical components. It also features excellent durability in harsh temperatures, water, and vibrations. This promotes reliability in the most demanding operations.
Larger Radiator
The XF2 Series was designed with a new large radiator to create a more efficient cooling system and increase the reliability of the forklift.
Modern Design
The XF2 series features a completely redesigned modern look with a lower center of gravity due to the positioning of the of the steering axle and updating the counter weight design.
Optimized Cooling System
The forklifts are equipped with large capacity aluminum radiators. These radiators have optimized heat dissipation channels to enhance cooling capabilities. This keeps the engine running reliably in heavy-duty applications.
The XF2 series is designed to facilitate easy inspections and servicing. Easy maintenance reduces the amount of downtime cost of ownership.
1. The cover on the dash can be lifted up to easily check the brake fluid.
2. The two-piece design makes the floorboard easy to lift and remove for access to the powertrain.
3. The easy-to-operate latch provides quick access to the engine compartment.
4. The radiator is much larger creating a more efficient cooling system .
A wide range of technology is applied to ensure absolute safety for both the operator and those in the vicinity.
Operator Presence Sensing System
The operator presence sensing (OPS) system incorporates a lifting, tilting, and traveling stop function. When the operator leaves the seat, the system automatically locks the lifting/tilting functions and disables the forklift from traveling to ensure safety.
Mast Safety Device
The throttling device locks the mast in place if there is a hydraulic failure. This adds to the operational safety of the truck.
Soft Lifting/Landing System
In addition to the soft landing system, the soft lifting system is adopted (front lifting cylinders of the full free-lift stage 2 & 3 masts). As a result, the noise and shock of the mast significantly decrease when lifting material.
Locking Mechanisms
There is a locking mechanism found on the engine hood, damper, and parking brake for the operator’s safety. Additionally, the throttling device locks the mast in place if there is a hydraulic failure.
Optional Rear Reverse Grip
An optional rear reverse grip with a horn button enhances operational safety while traveling in reverse.
